Connecting A Tv Cable Or An Antenna - Hitachi HIT15WDVB Instruction Manual

Connecting a TV Cable or an Antenna

Cable TV ( CATV ) Connection
A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-ohm cable into the
ANT. terminal.
Some cable TV companies offer premium pay channels. Since the signals of these
premium pay channels are scrambled, a cable TV converter/descrambler is generally
provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels. ( Set your TV to
channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company. )
For more specific instructions on installing cable TV, consult your cable TV company. One possible method
of connecting the converter/descrambler provided by your cable TV company is shown in the diagram
below.
VHF / UHF IN
The RF switch ( not included ) is required to provide two inputs ( A and B ). Setting the RF
switch to position A allows viewing of all unscrambled channels by using the TV channel keys.
Setting the RF switch to position B allows viewing of all scrambled channels via the converter /
descrambler by using the converter channel keys.
12
RF switch
( not included )
A
IN
OUT
B
Cable TV converter/
descrambler
( not included )
2-set signal
splitter
Cable TV Line
(not included)