Connection; Connecting Antenna Cable; Connecting External Equipment - Hitachi LE42EC06AU User Manual

Connection

Connecting Antenna Cable

Connect the 75 ohm coaxial cable (commercially available) to the antenna input terminal.
• To obtain better picture quality, use an outdoor antenna.
• If your outdoor antenna uses 75 ohm coaxial cable with an F-type connector, connect it directly to the antenna input
terminal at the rear panel.
• If your outdoor antenna uses flat cable, connect it with a 75 ohm adapter (commercially available) and then to the
antenna input terminal at the rear panel.

Connecting External Equipment

You can select the appropriate connection depending on the equipment that you are connecting and the
level of picture quality you are trying to achieve. To view external source images, press
input source.
• Please refer to the user manual of the external equipment for more information on the connection to the TV.
• Please disconnect all the power supplies to the external equipment and TV before connection.
To use HDMI terminal
or
If the external equipment has DVI output, you can connect it to the HDMI terminal using a HDMI-DVI
cable. In case of using the HDMI-DVI cable, connect analogue audio signal to RGB audio input terminal.
Follow the above example when connecting your other devices by connecting the Output of your video
device to the related Input on the TV.
12
or
(rear) (side)
•
The HDMI cable connector should
not exceed 20mm in width (W) and
10mm in height (H).
HDMI
to select
W
H
HDMI Device