Hitachi HIT15WDVB Instruction Manual page 14

Connecting a TV Cable or an Antenna
The STANDBY button on the right side view of LCD TV and also on the remote control is only used
for powering up and switching the TV to standby mode, it does not disconnect the device from the mains
supply.
To completely disconnect the main voltage, please switch off the power switch on the rear of the TV, or
remove the power plug from the socket.
INPUT
STANDBY
Make sure the power switch
is switched off
Unplug from a
wall outlet
AC IN 100-240V AC POWER VHF/UHF IN
50/60Hz SWITCH
PC AUDIO IN
13