Table of Contents
Advertisement
stay alert. Watch what you are doing, and use common sense when operat-
1.
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. be sure the power switch is off before plugging
3.
in. Carrying power tools with your finger on the Power Switch, or plugging in power
tools with the Power Switch on, invites accidents.
Remove adjusting keys or wrenches before turning the power tool on. A
4.
wrench or a key that is left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times. Proper footing
5.
and balance enables better control of the power tool in unexpected situations.
Always wear eye, hearing, and breathing protection. For welding safety equip-
6.
ment, refer to number 9 on page 7.
Use clamps (not included) or other practical ways to secure and support the
1.
workpiece to a stable platform. Holding the work by hand or against your body
is unstable and may lead to loss of control.
2.
Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
Do not use the power tool if the power switch does not turn it on or off. Any
3.
tool that cannot be controlled with the Power Switch is dangerous and must be
replaced.
Disconnect the power Cord plug from the power source before making any
4.
adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
store idle tools out of reach of children and other untrained persons. Tools
5.
are dangerous in the hands of untrained users.
6.
Maintain tools with care. Keep tools in good condition. Properly maintained
tools will get the job done better. Do not use a damaged tool. Tag damaged tools
"Do not use" until repaired.
SKU 95424, 95629
pERsOnAL sAfEty
tOOL UsE AnD CARE
for technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
Page 5
Advertisement
Table of Contents
