Installing A Wire Spool - Chicago Electric 95424 Assembly And Operating Instructions Manual

Assembling the Wire Spool depends on whether you are using a 7" Spool or an 11"
Two variants to expose the Wire Drive Assembly are probable for Spool 200mm (variant A)
Spool.
Two variants to expose the Wire Drive Assembly are probable for Spool 200mm (variant A)
1.
1.
Lift the Door (14A) of the Welder to expose
Lift the Door (14A) of the Welder to expose
3.
3.
When a slight force is needed to turn Spool,
When a slight force is needed to turn Spool,
1.
1.
Lift the Door (14A) of the Welder to expose
Lift the Door (14A) of the Welder to expose
MIG&ARC 250 AMP - SKU 95424
MIG DUAL 250 AMP – SKU
MIG&ARC 250 AMP - SKU 95424
MIG DUAL 250 AMP – SKU
SKU 95424, 95629
AssEMbLy InstRUCtIOns (COntInUED)

InstALLInG A WIRE spOOL

TO INSTALL THE WIRE SPOOL
TO INSTALL THE WIRE SPOOL
and for EN 759 Spool 300mm (variant B) use.
for use with a 7" spool:
and for EN 759 Spool 300mm (variant B) use.
the Wire Drive Assembly.
the Wire Drive Assembly.
tension is set.
tension is set.
for use with a 11" spool:
the Wire Drive Assembly.
the Wire Drive Assembly.
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
for technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
Variant A
2.
Variant A
2.
Insert the Spool and the Pressing Cartridge
onto the Threaded Shaft (11A). Making
Insert the Spool and the Pressing Cartridge
sure the Spool's Welding Wire unwinds
onto the Threaded Shaft (11A). Making
from the bottom (clockwise).
sure the Spool's Welding Wire unwinds
from the bottom (clockwise).
4.
4.
Screw the Fixing Cover into the Threaded
Shaft (11A).
Screw the Fixing Cover into the Threaded
Shaft (11A).
Variant B
Variant B
2.
2.
Insert the Spool's Holder onto the
Threaded Shaft (11A).
Insert the Spool's Holder onto the
Threaded Shaft (11A).
Page 14
Page 14
Page 13