Chicago Electric 95424 Assembly And Operating Instructions Manual page 12

2.
Install the Back Wheels (37A) at the Axle (36A). Install the Back Wheels (37A) at the Axle (36A).
3.
Fix the Back Wheels(37A) with the
4.
Set the Axle (36A) with the Back Wheels
(37A) attached against the bottom of the
case. Then, screw the Bolts through the
Washers and into the bottom of the case.
(see figure 4, above left.)
SKU 95424, 95629
AssEMbLy InstRUCtIOns (COntInUED)
stationary
Clips (38A).
for technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
Mobile
2.
3.
Fix the Back Wheels (37A) with the
Clips (38A).
4.
Set Arm (5A) against the top back of the
welder case. Screw the Bolts through
Washers and into the welder case.
(see figure 4, above right.)
Set the Support (35A) against the bot-
tom back of the case. Align the holes and
screw the Bolts through the Washers and
into the case.
Set the Axle (36A) with the Back Wheels
(37A) against the bottom of the Support
(35A). Screw the Bolts through the Wash-
ers and into the Support.
Arm (5A)
Washer and Bolt
Page 12