Other Advanced Configurations (Rdm2080D Model); Call Tone; Microphone Gain Level - Motorola RDM series MURS User Manual

OTHER ADVANCED CONFIGURATIONS
(RDM2080d MODEL ONLY)

Call Tone

This feature sends an alert notification to other
radios in the fleet prior to the transmission with
the intent to grab the receiver's attention so the
transmission is not missed.
In order to configure this feature via the front
panel, it must first be enabled via the CPS.
To configure call tones:
1. Enter "Advanced Configuration Mode" and
scroll through the menu options until the screen
shows the image below:
TONE
The current call tone setting will be blinking. A
call tone value (0,1,2 or 3) must be selected by
pressing the /
pre-play before being selected.
buttons. The call tone will
2. Long press the PTT button to save and exit,
--or-- short press the PTT button to configure
the next feature without saving.

Microphone Gain Level

The sensitivity of the microphone can be
adjusted in both the radio's microphone and
the accessory's microphone to fit different
users or operating environments.
The Gain determines the microphone's
transmitted audio volume level for the receiving
radio's speaker.
To configure microphone gain level:
1. Enter "Advanced Configuration Mode" and
scroll through the options by short pressing the
PTT button until the screen shows the image
below:
IMIC
The current microphone gain level setting will
blink.
41
English