Reading Frequency Values; Reading Ctcss/Dpl Values - Motorola RDM series MURS User Manual

Reading Frequency Values

The Frequency value is only one digit as RDM
Series MURS Two-Way radios have 5
predefined frequencies.
To read frequency values:
1. From "Idle" Advanced Configuration Mode,
short press the PTT button to hear the first
value (Refer to "Advanced Configuration
(RDM2020 Model)" on page 44). This value
corresponds to the frequency's first digit value.
Frequency
PTT
2. Short press the PTT button to read CTCSS/DPL
values.
46
English
1
First
PTT
Digit
Long
Long
PTT
PTT

Reading CTCSS/DPL Values

When reading the values for CTCSS/PL Codes
the radio signals the digit codes each time the
PTT button is short pressed. The RDM Series
have up to 213 codes available (Refer to
"Frequency and Code Charts" on page 50).
The following is an example of the order in
which the radio signals the "118" CTCSS/DPL
code:
1 1 8
First
Digit
Second Digit
To read CTCSS/DPL Values:
1. Short press the PTT button. The radio signals
the first digit "1" .
Third
Digit