Power Management Setup - EUROCOM 7200 User Manual

Power Management Setup

Auto DOZE Mode CPU Clock
Auto DOZE Mode Time Out
Suspend Mode
Suspend Time Out
5V to 0V Suspend Time Out
Battery Low Suspend
Resume Alarm
Resume Alarm Time
Set the CPU clock state when the CPU enters
DOZE Mode. The settings are Disabled, CPU
3/4, CPU/2, CPU/4, CPU/8, or CPU/16.
Specify the length of a period of system
inactivity. When the timer expires, the CPU
enters DOZE Mode. The settings are Disabled,
1/2 second, 2 seconds, 8 seconds.
Set the level of suspend mode. The settings are
5 volt (Suspend to DRAM), 0 volt (Suspend to
Disk), or 5V to 0V (Suspend from DRAM to
Disk).
Specify the length of a period of system
inactivity. When the timer expires, the system
enters Suspend Mode. The settings are
Disabled, or from 1 minute to 20 minutes.
Specify the length of a period of system
inactivity. When the timer expires, the system
enters 5V to 0V Suspend Mode (if configured
so). The settings are from 1 minute to 120
minutes.
Suspend the system upon a low battery
condition. The settings are Disabled, or
Enabled.
Resume the system from 5V Suspend Mode (if
configured so) when resume alarm timer
expires. The settings are Enabled, or Disabled.
Set the time to resume the system from 5V
Suspend Mode.
48