Advanced Setup
Plug and Play Aware O/S
st
1
Boot Device
nd
2
Boot Device
rd
3
Boot Device
th
4
Boot Device
BootUp Num-Lock
Mouse Support
Password Check
OS/2 Compatible Mode
Set Yes if the operating system is Plug & Play-aware.
Set No if the OS is not PnP-aware.
Set the first boot drive. The settings are Disabled,
IDE-0, IDE-1, Floppy, Floptical, CDROM.
Set the second boot drive. The settings are Disabled,
IDE-0, Floppy, Floptical or CDROM.
Set the third boot drive. The settings are Disabled,
IDE-0, Floppy, Floptical or CDROM.
Set the fourth Boot drive. The settings are Disabled,
IDE-0, Floppy, Floptical or CDROM.
Set Off to turn the Num Lock key off when the system
is booted, or set On to turn the Num Lock on.
Set Enabled to support a PS/2-type mouse, or set
Disabled to disable the capability.
Set Always to pop up a password prompt every time the
Notebook is turned on. Set Setup to pop up a password
prompt every time WINBIOS is accessed.
Set Enabled to run with IBM OS/2. Set Disabled to
disable the capability.
46
Need help?
Do you have a question about the 7200 and is the answer not in the manual?