Elo TouchSystems IntelliTouch SecureTouch Manual page 92

Part Number
466907-000
644845-000
655465-000
429761-000
889507-000
816821-000
323227-000
276875-000
793054-000
775252-000
451043-000
811847-000
075795-000
621717-000
304477-000
942741-000
454173-000
459635-000
175175-000
084037-000
980773-000
C-80
I n t e l l i T o u c h / S e c u r e T o u c h G u i d e
Description
Power Supply, U.S., Wall mount, 90-130 Vac, 60 Hz. in; +5, -12, +12 Vdc
out (also needs 323227-000 or 276875-000 power cord). Provides power
to the following obsolete controllers: 2300 serial in enclosure, 4002 seria
Power Supply, International. Free standing, 115-230 Vac, 50/60 Hz. in;
+5, -12, +12 Vdc out (also needs 323227-000 or 276875-000 power cord).
Provides power to the following obsolete controllers: 2300 serial in
enclosure, 4002 serial enclosure, and Appl
Power Converter, DC to DC, +8 to 30Vdc in, +5V regulated DC out. For
tapping monitor DC power for internal 2310B, 2500S or 2500U
controllers.
Power cable, low voltage twisted pair for 2310B, 2500S or 2500U. 9 inch,
2X5F to 1X2F, 9M DC/DC
Power cable, low voltage twisted pair for 2310B, 2500S and 2500U. 18
inch, 2x5F to flying leads.
Power cable, low voltage twisted pair for E281-2310MX, 18 inch, 1x3F to
flying leads (non-standard)
Power Cord - Europe. For use with a power supply (pcn 004100-215)
and/or monitors in Europe.
Power Cord - United Kingdom. For use with a power supply (pcn
004100-215) and/or monitors in UK.
Cables
USB connector cable, 18 inch length, to connect monitor to host computer
USB connector cable, 72 inch length, to connect monitor to host computer
Touchscreen cable for external controller, 72 in. DB9M to DB9F, goes
from back of monitor to controller
Touchscreen cable for external controller, 108 in. DB9M to DB9F, goes
from back of monitor to controller
Extension cable from controller, internal flat 8 in., 2x6M to DB9M, goes
from controller to back of monitor.
Extension cable from controller, 48 in., 2x6 to DB9F, goes from
touchscreen controller to DB9F
Extension cable from touchscreen cable, 48in., 2x6M to DB9M, goes
from touchscreen connector to back of monitor.
Serial output cable, internal, ribbon 30 in., 2x5F to DB9F, goes from
controller to back of monitor.
Serial output cable, external, 72 in. DB9M to DB9F. Goes from back of
monitor (with internal controller) to COM port.
Ground lead with ring terminals, 17 in., Used to connect serial controller
or DB9 shell at back of display to chassis ground.
Output cable for E281-2303. 72 in. 4-pin male mini-DIN to 4-pin male
mini-DIN.Goes from 002862-K1 or 002860-K1 to Macintosh ADB port.
Macintosh serial cable for touchmonitors with internal serial controllers to
interface to Macintosh. DB9M to 8-pin mini-DIN male for Macintosh.
Standard DIN keyboard power tap cable. E281-2310MX keyboard power
tap cable.