Disable Sleep Mode; To Disable The Sleep Mode - Minolta DI2510 User Manual

6.3 Administrator Settings

Disable Sleep Mode

This parameter is used to disable the Sleep function, which automatically turns off
the printer heater after no operation is performed for a specified length of time.

To disable the Sleep mode

1
Follow the procedure described in "To display the Administrator Management
screens" on page 6-2 to display the Administrator Management screen.
2
Touch [Admin. 1], and then touch [Admin. Set].
3
Touch [Disable Sleep Mode].
4
Touch [Yes] or [No], and then
touch [Enter].
❍
If [Yes] is selected, [No Reset]
appears in the screen for the
"Sleep Mode Setting" function,
which is available from the
User's Choice screen.
5
On the User's Choice [3/6] sleep mode setting screen, select [No].
6
Continue touching [Enter] to return to the Utility screen, and then touch [Exit] to
return to the Basics screen.
Di2010/Di2510/Di3010/Di3510
6
6-9