EUROCOM 2700-C User Manual page 62

· Pressing any keyboard key
· Pressing the power button (if configured as a Suspend/Resume func-
tion under SCU)
· An incoming call to your modem
· Alarm resume is enabled and expires
B: Suspend To Disk or Hibernate *
Suspend To Disk or Hibernate uses no power and saves all of your infor-
mation on a part of the HDD. It saves the maximum power but takes the
longest time to return to full operation. You can set your notebook to
automatically enter Suspend To Disk mode when the battery power is
almost depleted. This prevents losing any data due to loss of power.
The system will resume from Suspend-To-Disk mode by:
· Pressing the power button
· Alarm resume (month/day/hour/minute)
Power and Battery Information
Note
Suspend to
Disk is a term
used by the SCU.
Hibernate is a
term used by
Windows. They
both refer to the
same power man-
agement function.
*
If you are using
Windows 98 or
Windows 98SE
you must first
create a file on
you hard drive in
order to use this
power manage-
ment function.
Information is
available in table
3-1 on page 3-5.
3
3 - 3