Lcd Panel; Memory Module - EUROCOM 2700-C User Manual

User's Manual
7
7 - 8

LCD Panel

Problem: The fonts are too dark.
Solution: The brightness or contrast is not correctly set. Press the Fn + F7 or
Fn + F8 key combinations (only with a DSTN panel) to adjust the contrast. Use
Fn + F9 or Fn + F10 to adjust the brightness.
Problem: The screen is blank.
Solution 1: The panel may be set for an external monitor, please reset to nor-
mal display using the hot keys.
Solution 2: The screen saver is activated, please press any key or touch the
trackpad to return to your display.
Solution 3: The brightness or contrast needs to be adjusted.
Solution 4: The system is in suspend mode. Please press any key or touch the
trackpad to wake up the computer.
Problem: The LCD panel displays incorrect fonts or blinks when the
computer is connected with an external monitor.
Solution: The external monitor resolution exceeds what the LCD panel can
support. Please disconnect the external monitor and restart the computer.

Memory Module

Problem: The computer will not boot.