Write (6) Command Descriptor Block-Data Format; Write (6) Command-Field Descriptions - Maxtor ATLAS 10K III Product Manual

SCSI Description
The WRITE (6) command requests that the drive write initiator-supplied data to the
medium.
The Command Descriptor Block for the WRITE (6) command is shown in Table 5-
212; Table 5-213 describes the data fields.
T a b l e 5 - 2 1 2 WRITE (6) Command Descriptor Block-Data Format
$ K V
$ [ V G
0
1
2 - 3
4
5
T a b l e 5 - 2 1 3 WRITE (6) Command-Field Descriptions
( K G N F
Logical Block
Address
Transfer Length
5-170 Maxtor Atlas 10K III
  
Reserved
The address of the first logical block where the Write operation will oc-
cur.
The number of contiguous logical blocks of data to transfer. A transfer
length of 0 indicates 256 logical blocks are to be transferred. Any other
value indicates the actual number of logical blocks that will be trans-
ferred.
 
Operation Code (0Ah)
Logical Block Address
Logical Block Address
Transfer Length
Control
& G U E T K R V K Q P