Power Connector (J1, Section A) - Maxtor ATLAS 10K III Product Manual

    2 + 0 & % 2 1 9 ' 4 % 1 0 0 ' % 6 1 4   2 + 0 % 1 0 0 ' % 6 1 4
The recommended mating connectors for the +5 VDC and +12 VDC input power
connector are listed in Table 3-8.
Note: J1, Section A, pins 2 and 3 are the +5 and +12 volt returns and
    2 + 0 / # 6 + 0 ) % 1 0 0 ' % 6 1 4
The recommended mating connectors for the +5 VDC and +12 VDC input power
connector are listed in Table 3-8.

Power Connector (J1, Section A)

1 +12 VDC
2 Ground
Return for
+12 VDC
3 Ground
Return for
+5 VDC
4 +5 VDC
are connected together on the drive.
4-Pin Connector:
AMP P/N 1-480424-0
Loose piece contacts:
AMP P/N VS 60619-4
Strip contacts:
AMP P/N VS 61117-4
Maxtor Atlas 10K III 3-21
Installation