5 2 # % ' 4 ' 3 7 + 4 ' / ' 0 6 5
The Maxtor Atlas 10K III hard disk drive is shipped without a faceplate and comes
in the following SCSI interface configurations:
• 68-pin Wide SCSI
• 80-pin SCA-2 SCSI
Figure 3-1 shows the mechanical dimensions of each of the drives.
Shock Foot (typical)
146.50 mm
Shock Foot (typical)
146.50 mm
Dimensions for the Maxtor Atlas 10K III Hard Disk Drives
25.59 mm
101.60 mm
25.59 mm
101.60 mm
Maxtor Atlas 10K III
Installation
3-3