Maxtor ATLAS 10K III Product Manual page 206

SCSI Description
0x5D 0x14
0x5D 0x32
0x5D 0x37
0x5D 0x38
0x5D 0x41
0x01
Rec
0x5D 0x50
Error
0x5D 0x5B
0x5D 0xFF
0x80 0x10
0x80 0x11
0x80 0x12
0x82 0x20
0x04 0x00
0x04 0x01
0x04 0x02
0x04 0x04
0x04 0x09
0x04 0x80
0x02
0x04 0x82
Not
Ready
0x04 0x83
0x04 0x84
0x04 0x85
0x04 0x86
0x04 0x88
0x04 0x91
0x04 0x92
5-142 Maxtor Atlas 10K III
SMART EC_EWS_CBBTable
SMART EC_EWS_CReadError
SMART EC_EWS_CReadErrorTA
SMART EC_EWS_CWriteErrorTA
SMART EC_EWS_CWriteError
SMART EC_EWS_CCSS
SMART EC_EWS_TrippedSpinFail
SMART EC_EWS_TestTripped
DER EC_REC_SPLL1_ERR
DER EC_REC_SPLL2_ERR
DER EC_REC_BSM_DIS_ERR
EC_REC_SPOKE_TIME_
DER
ERR
HDA EC_NOT_READY
MISC EC_DRV_RDY_IN_PROGRESS
EC_NEED_START_UNIT_
MISC
CMD
MISC EC_NOT_READY_FORMAT
MISC EC_NOT_READY_SLFTST
SYS EC_FSBA_UNREADABLE
SYS EC_FAIL_READ_SDESC
SYS EC_READ_DISKWARE
EC_DISKWARE_NOT_
SYS
READY
SYS EC_DEAD_VECTOR
MISC EC_HDA_NVR_MISMATCH
EC_READ_CONFIGPG_
SYS
FILE
MISC EC_NOT_READY_SS
MISC EC_NVR_NOTCOMPATIBLE
Smart trigged due to bad block %
free (Compaq)
Smart trigged due to read errors
(Compaq)
Smart trigged due to TA read
errors (Compaq)
Smart trigged due to TA write
errors (Compaq)
Smart trigged due to write errors
(Compaq)
Smart trigged due to contact start
stop (Compaq)
Smart trigged due to spin retry
Smart test tripped
Block Slow PLL Error:
recovered.
Split Slow PLL Error:
recovered.
Block state machine disabled:
recovered.
Spoke-to-spoke time error:
recovered.
Drive Not Ready
Drive Not Ready, in process of
coming ready
Drive Not Ready, use START
cmd
Drive Not Ready, formatting
Drive Not Ready, self test in
progress
FileSystem Boot Area unread-
able @ POR.
Failure to read sector descriptor
file.
Error reading diskware file.
Diskware not loaded yet - issue
start cmd.
Code jumped to Dead Vector.
Drive not ready, config page 8/
HDA mismatched
Error reading Config Page file.
Drive not ready, selfscan is run-
ning
NVR image not compatible.