Environmental Specifications; Mechanical - Maxtor ATLAS 10K III Product Manual

Specifications
   / ' % * # 0 + % # .
The Maxtor Atlas 10K III hard disk drives have the following mechanical
characteristics:
Height
Width:
Depth:
Weight (4-disk): 1.58 lb (720 grams)
All dimensions are exclusive of any optional faceplate.
   ' 0 8 + 4 1 0 / ' 0 6 # . % 1 0 & + 6 + 1 0 5
Table 4-7 summarizes the environmental specifications of the Maxtor Atlas 10K
III hard disk drive.
2 # 4 # / ' 6 ' 4
Temperature
(Non-condensing)
Temperature Gradient
(Non-condensing)
Humidity
Maximum Wet Bulb
Temperature
Humidity Gradient
Altitude
1.
Except when shock feet are uncompressed (see Section 3.2.1, "Shock Feet" on page 4 of Chapter 3).
4-8 Maxtor Atlas 10K III
1
: 1.0 in. (25.4 mm)
4.0 in. (101.6 mm)
5.75 in. (146.1 mm)
T a b l e 4 - 7 Environmental Specifications
1 2 ' 4 # 6 + 0 )
5 to 55 C
(41° to 131 F)
20 C/hr maximum
1 5% to 95% RH
37 C (98°F)
30% per hour
-300 m to 3,048 m
2
(-1,000 to 10,000 ft.)
1. No condensation.
2. Altitude is relative to sea level. 1,000 feet = 3,000 meters.
0 1 0 1 2 ' 4 # 6 + 0 )
-40 to 70 C
(-40 to 158 F)
30 C/hr maximum
5% to 95% RH
46 C (126°F)
30%per hour
-300 m to 12,000 m
(-1,000 to 40,000 ft.)