Using The Chooser To Select The Printer - Epson STYLUS COLOR II Setup Manual

The driver and its components are described below.
StylusColor driver. This driver lets you use the serial
interface to connect the printer directly to the
Macintosh.
Epson Monitor2. This utility manages print jobs that
have been sent to the printer. Background printing
must be on to use the Epson Monitor2 Utility; see
Chapter 3 for more information.
Bi-D Calibration Utility. This utility calibrates the
printer so vertical lines are aligned; see Chapter 3 for
more information.
8. Click Install to copy the software to your hard disk, and
follow any instructions on-screen.
9. When the installation is complete, click Restart to eject the
driver diskette and restart the computer.
The Installer places the Bi-D Calibration Utility in a new folder
on your hard disk called StylusCOLOR II Folder and places the
Epson Monitor2 Utility in the Extensions folder. Now follow
the instructions in the next section to select the printer using
the Chooser.

Using the Chooser to Select the Printer

After you install the printer driver, follow the steps below to
select the printer before you begin printing. You need to choose
the printer only the first time you use it or whenever you want
to use another printer. (Your Macintosh always prints using the
last printer selected.)
Installing and Using the Printer Driver
2-3