Using The Chooser To Select Your Printer - Epson Stylus Pro 9500 Startup Manual

2. If a single Installer icon appears, double-click the icon. If
separate folders containing installer icons for several
languages appear, double-click the folder for your preferred
language, then double-click the Installer icon inside it.
3. At the initial screen, click Continue. The following dialog box
appears.
4. To install the printer software included on your printer
software CD-ROM, make sure the Install Location box
displays the correct disk drive, then click Install.
5. When a message appears informing you that the installation
is complete, click Restart to restart your computer.

Using the Chooser to select your printer

After you have installed the printer software on your Macintosh,
you need to open the Chooser and select your printer. You must
select a printer the first time you use it or whenever you want to
switch to another printer. Your Macintosh will always print using
the last printer selected.
Setting up the Printer with Your Macintosh
2
2-7