Print Settings - Epson STYLUS COLOR II Setup Manual

Light/Dark slider
Controls how much ink is applied to the paper. The slider has
five settings that allow you to apply more or less ink. The more
ink, the darker the colors. Move the slider to the right for more
ink and darker colors; slide it to the left for less ink and lighter
colors. (Increasing the amount of ink means it takes longer for
the ink to dry.)
Note:
The slider is not accessible if Monochrome ink is selected.

Print Settings

The following settings control the resolution, media type, and
print options.
Resolution
Specifies the resolution to be 720 dpi, 360 dpi, or 180 dpi.
Resolution is the amount of detail used to create an image.
The higher the resolution, the sharper and finer the image.
For the best possible resolution, choose Super -720 dpi. When
you select this resolution, MicroWeave is automatically turned
on and High Speed mode is turned off. For best results at
720 dpi, load EPSON special coated paper or 720 dpi or
high-quality glossy paper.
For most color printing, select Best -360 dpi. This resolution
produces good-quality, full-color images using less memory
and in less time than 720 dpi. For best results at 360 dpi, use
EPSON special coated paper for 360 dpi.
When speed is important and draft quality is good enough, use
Draft -180 dpi resolution.
Note:
Printing at lower resolutions also conserves ink.
2-10
Installing and Using the Printer Driver