Axis Backlash Adjustment - Gerber GS750 Plus User Manual

X Axis Backlash Adjustment
SYMPTOMS
Text cut in AXIS SWAP mode has closure problems.
OBJECTIVE
To adjust the tension of the X axis gear to produce good letter
quality in AXIS SWAP mode.
ADJUSTMENT PROCEDURE
1. Turn the plotter power off.
2. Remove all tools and material from the plotter.
3. Open the bail arms.
4. Remove the cover from the left end of the plotter. (See the
Cover Removal Section.)
5. Hold the RESET key during power-up. Release the RESET
key at the steady tone, and allow the self-check tests to
complete. Press the left arrow key to lock the motors.
Plotter Adjustments 65