Blade Replacement - Gerber GS750 Plus User Manual

plus
32 GS750

BLADE REPLACEMENT

Five carbide knife blades are included with the GS750
one installed in the tangential knife holder
!
two tangential knife spares
!
one installed in the swivel knife holder
!
one swivel knife spare
!
Extra blades and special angled blades for sandblast vinyls are
available from your Gerber distributor.
WARNING: The blade is very sharp. Take care when
handling the knife holder and blade.
CAUTION: Blades are fragile and can break. Do not use
tools to handle new blades.
The replacement procedures for the tangential and swivel knife
blades are different.
To replace the tangential knife blade
1. Loosen hex screw with the Allen wrench from the tool kit.
2. Carefully remove the old blade.
3. Install the replacement blade in the slot provided, not riding up
on either edge.
4. Gently seat the flat end of the blade against the pin stop with
the blade point toward the center of the tool. Retighten the hex
screw.
plus
: