Add Plotters - Gerber GS750 Plus User Manual

plus
14 GS750
5. Click on the port to which the plotter is connected (COM1,
COM2, COM3, or COM4) in the Ports box.
6. Click on ADD. GS750
box. Your system is now set up to use the GS750
Note: The Default Plotter note in the lower right corner of the
dialog box tells you the name of the plotter your jobs will be
sent to unless otherwise specified in the Plot program.
7. Click on Continue. The screen will return to the GSP Setup
Menu.
8. Double-click on the Control Bar to exit the GSP Setup Menu.
The system will return to the GSP GRAPHIX ADVANTAGE
program group and you can now access the GS750

Add Plotters

Multiple plotters can be added to your system. They must be
added one by one.
1. Click on the plotter you wish to add from the plotters list box.
2. Click on the port it will be connected to.
3. Click on Add. The highlighted plotter is added to the Ready
for Plotting list box.
Note: For each plotter you add, a number is added after the
plotter model number (for example, GS 750-1 for the first plotter
added, GS 750-2 for the second).
plus
appears in the Ready for Plotting list
plus
plotter.
plus
plotter.