Panel Operation Atpoweron - Epson Stylus 800 Service Manual

1.4.2 Panel Operation at Power On
You can turn on the following functions at power on by holding down buttons cm the control
panel.
Self-test mode:
Hex dump mode:
Demonstration mode:
Smudge prevention mode:
Other functions that can be activated from the control panel at power on, such as the default setting
mode and the initial ink charge mode, are described in the sections that follow.
1.4.3 Defauit Setting
The printer lets you set and save some default settings that it will start with after every
initialization. You can define the settings in the table below in default setting mode. Start default
setting mode by holding down the Ecofimy/Condensed button while tuming-6n the printer.
Menu
Contents
Character Table Selects the character table
ON: Print direction is selected automatically for optimal print
OFF: Depends onthe ESC U command.
ON: For netvvorkenvironments, such as LocalTalk.
Network l/F Mcde
ON: For normal environments. (Time-out printing is enabled.)
ON: To ensure proper printing ofimagescontaining graphics
Mixed Text/
Graphics Mode
OFF: For normal use.
ON: Line feed operation is performed automsticaltyupon
Auto Line Feed
OFF: No line feed operation with CR code.
Note: 1 = /fset to ON, the capcityof input bufferh finu'tedto 8KB.
1-14
Start self-test printing by turning the printer on while holding down
the Font button (LQ self-test) or LoadEject button (Draft self-test).
Start the built-m hexadwirnal data dump print mode by turning the
printer on while holding down (he Font and
Once this mode is selected, the printer pMts all received data m
hexadecimal hrnat.
Start printing of a demonstration page by turning on the printer
while holding down the Ah button.
Enter smudge prevention mode by turning on the printer while
holding down the AH and Font buttons.
If the paper has a tendency to smudge during high duty printins
you can prevent smudges using this feature. Jn this mode, the
printer waits a few seconds after printing a line to line feed.
Description
quality (alignment).
and ecalable fonts using certain applications, ~lh as
MS Wotd or WordPerfect version 5.1 or eartier.
receipt of the CR code.
SiJdu88m+ ~ Wnual
buttons.
Setting
ON
OFF
OFF
OFF
Rev. A