Epson Stylus 800 Service Manual page 55

Disassembly and Assemb&
3.2.2 Power Supply Unit (CI06 PSB-WPSE-B Board) Removal
[Step 1] Remove theupperhousing. (Relkr tostxtion3.2.l.)
[Step2] Disconnect thecablesfromconnectors CNl and CN30ftheC106PSB-B/PSE-B board.
supply unit to the lower housin~ as shown in the figure below.
of the printer.
When you disconnect and connect the cablefhn connector CN3 of the CIW PSB-BI
When you connect the cable to connector CZV3 of the CUM PSB-BIPSE-B boarh align the
yellow stripe on the cabk with pin
Figure 3-3. Power Supply Unit Removai
of CN3.
1
securing the power
. -