Waste Ink Tank Overflow Displayed - Epson Stylus 800 Service Manual

Stylus S00+ Sarvice Manual
The paper path is defective.
The paper-end sensor is
defective.
Table 5-13. Ink Low or Ink End Displayed
Cause
The Cl 34 MAIN board may
be defective.
Cause
Connector CN3 on the C134
MAIN board may be
disconnected.
The printhead connector may
be disconnected.
The MAIN board may
Cl 34
Table 5-15.
Cause
The waste ink tank may be
full or the C134 MAIN boatd
may be defective.
Rev. A
Table 5-12. Paper Jam Displayed
Step Checkpoint
Is the paper path OK?
1
2 —
Step Checkpoint
—
Table 5-14. No Ink Cartridge Displayed
Step Checkpoint
Is connector CN3 on the
1
disconnected?
Is the printhead mnnector
disconnected?
3 —

Waste Ink Tank Overflow Displayed

Step Checkpoint
Is the printer OK after the
1
Troubleshooting
Finding Solution
Replace or
reassemble the
No
paper path
mechanism.
Replace the
—
paper-end
sensor.
Finding Solution
Replace the
—
board.
Finding Solution
Connect CN3 on
Yes the C134 MAIN
board.
Connect the
Yes
Replace the
—
board.
Finding Solution
Replace the
Yes waste ink tank
pad.
Replace the
board and the
No
waste ink tank
pad.
5-7