Head Cleaner Replacement - Epson Stylus 800 Service Manual

Stylus MIO+ Sarvks Manual
3.2.5.3

Head Cleaner Replacement

[Step 1] Remove the pump unit. (Refer tosection3.2.5.2.)
[Step 2] Remove the head cleaner from the pump unit.
Keeping the head cleaner clean is extremely important to keep the ink injection system
working properly in the printhead, and it directly aflects printing quality.
Therefore, handle the head cleaner vey carejidlyl and obseroe the following instructions.
Never touch the head cleaner with your bare hands.
When attaching the head cleaner to the pump unit, weargloves and use clean tweezers
to handle it.
Cap Unit
Figure 3-10. Head Cleaner Replacement
Rev. A
Hook the CLEANER, HEAD to
the cap unit by turn up the pan of it.
Disassembly and Assembly
Cleaner
3-11