Printer Operations; Control Panel; Figure 1-8. Control Panel - Epson Stylus 800 Service Manual

Stylus &WO+ Sarvke Manual

1.4 PRINTER OPERATIONS

This section describes the basic operations of the printer.

1.4.1 Control Panel

The control panel for this printer contains five non-lock type push buttons and nine LED indicators
for easy ope;ation of the various printer functions.
Buttons
Pause
Economy/Condensed
Font
Load/Eject
Indicators
Pause
Data
Paper Out
Ink Out
Economy/Condensed
Font
Rev. A
0 0 0
'on'
m
s
San: H ( S)
Saris Sarif
E j e c t
Prestige
" Pause

Figure 1-8. Control Panel

Switches printer status between printing and no printin~ if there is
print datz-in the input buffer.
When you hold down this button and the Alt button in pause mode
for 2 seconds, the printer initiates printhead cleaning.
Selects economy or condensed printing alternately. Also works as a
reverse micro feed button, if the Alt button has been pressed.
Selects one of the available fonts. Also works as a forward micro
feed button, if the Ait button has been pressed.
When you press this button, the printer either loads new paper into
the printer or ejects paper currently in the paper path. Also works
as a reset button, if the Ah button has been pressed.
This button alternates functions of certain buttons. When you hold
down this button in pause mode for 3 seconds, the printer moves
the carriage to the ink cartridge installation/replacement position.
Lights when the printer is in pause mode.
Lights when there is print data in the input buffer.
Lights when the printer is out of paper. Blinks if a paper jam occurs.
Lights when the printer detects an ink end in the ink cartridge.
Blinks when the ink level becomes low.
This LED shows the currently selected mode.
Indicates the currently selected font.
II
1 0
[::
Reset
I I
1-13