Feed Dogs Lengthwise - Duerkopp Adler 550-12-12 Service Instructions Manual

3.4 Feed Dogs Lengthwise

With a maximum additional width set at the controls the feed dogs
should not hit each other and also not hit the needle plate.
Caution Risk of Injury !
Turn off main switch before adjusting.
–
Loosen screws 1 and 2.
–
Set the feed dogs lengthwise.
–
Tighten screws 1 and 2.
Screw 2 can only be reached from the outside through the hole in
the base plate.
1
2
19