Inserting The Hook In The Hook Holder - Duerkopp Adler 550-12-12 Service Instructions Manual

2.5 Inserting the Hook in the Hook Holder

1
8
2
The front of the hook should be at an angle of 89° 30' to edge 1 of the
apparatus opening.
Caution Risk of Injury !
Turn off main switch before adjusting.
–
Screw out screw 3 of the hook.
–
Place gauge 2 (Order no. 933 000750) on the edge 1 and bring the
hook into the correct position.
–
Tighten screw 3 of the hook.
3