2.2 Position of the Lower Timing Belt Pulley
The screws of the lower timing belt pulley should be in the position
shown when the sewing unit is arrested in position D (4 notches
visible).
Caution Risk of Injury !
Turn off main switch before adjusting.
–
Arrest the machine head in position D (4 notches visible).
–
With an incorrect setting of the screws first set the position of the
upper timing belt pulley (see chapter 2.1).
–
Remove the timing belt from the upper timing belt pulley.
–
Turn the lower timing belt pulley until the screws are in the position
shown.
–
All following settings must be checked or reset.
5