HP Jetdirect 4200 Manual page 70

System Messages
An I/O Error occurred while transferring the file.
The upgrade file has been transferred successfully.
You will need to restart your print server appliance for
the upgrade to take effect.
Restart Appliance
Message
The restart of the print server appliance has begun.
This system restart will take approximately 5-10
minutes. There will not be any web notification that
the system has been restarted.
TCP/IP
Message
Invalid IP Address
The IP address must be in the format xxx.xxx.xxx.xxx.
Invalid Subnet Mask
The subnet mask must be in the format
xxx.xxx.xxx.xxx.
Invalid Gateway Address
The gateway address must be in the format
xxx.xxx.xxx.xxx. If the gateway address is unknown,
use the appliance's IP address.
Invalid DNS Server Address
The DNS server address address must be in the format
xxx.xxx.xxx.xxx.
http://albatross.rose.hp.com/~lindsay/pdfs/english/sysmsgs.htm (3 of 6) [6/22/2001 11:25:59 AM]
The specified filename is not a valid upgrade file.
Retype the filename and try again.
Confirmation message.
Explanation / Remedy
Confirmation message.
Explanation / Remedy
IP addresses are written as four numbers separated
by periods, where the first number is between 1 and
255 and the other three numbers are between 0 and
255. Retype the IP address in the format
xxx.xxx.xxx.xxx.
Subnet masks are written as four numbers separated
by periods, where the first number is between 1 and
255 and the other three numbers are between 0 and
255. Subnet masks must be well formed to match
your network.
Retype the subnet mask in the format
xxx.xxx.xxx.xxx.
Gateway addresses are written as four numbers
separated by periods, where the first number is
between 1 and 255 and the other three numbers are
between 0 and 255. Retype the gateway address in
the format xxx.xxx.xxx.xxx. If the address is
unknown, use the appliance's IP address.
Retype the DNS server address in the
xxx.xxx.xxx.xxx format.
Note: This must be the server's IP address, not its
friendly name. If the network does not have a DNS
server, leave this field blank.