Table of Contents
Advertisement
Microsoft Networking Settings
Specified Domain Controllers
Create account in the NT Domain for
this device
Domain Administrator Name
Domain Administrator Password
http://albatross.rose.hp.com/~lindsay/pdfs/english/ntaa.htm (3 of 6) [6/22/2001 11:25:53 AM]
List of specified domain controllers to use for username
and password validation. The print appliance will try to
communicate with the first domain controller in the list.
If the print appliance cannot communicate with the first
one, it will then try the second domain controller in the
list, and so forth. Use the Move Up and Move Down
buttons to reorder the domain controller names in the list.
Use the Remove button to take a domain controller off
the list. (This is only valid when in manual mode.)
Check this to create a new computer account for the
appliance in the NT domain; then enter the domain
administrator username and password below.
A valid administrator's name as stored on the NT Domain
Controller.
A valid administrator's password as stored on the NT
Domain Controller.
Advertisement
Table of Contents
