Disassembling The Paper Support Block Assembly - Epson LQ-2170 Service Manual

Disassembly and Assembly

3.4.2 Disassembling the Paper Support Block Assembly

1. Remove 1 E -ring fixing the paper feed roller shaft to the right CSF frame.
2. Remove 2 CTBS (3
Figure 3-51 Removing 1 E-ring and 2 CTBS Screws
3. Remove both paper support assemblies along with the paper feed roller shaft and paper support
shaft.
4. Remove the paper feed shaft from both paper support assemblies by pulling them toward the
right or left side.
5. Remove both paper feed rollers from the paper support assemblies.
6. Remove both CSF roller covers by releasing the clips fixing them to the paper support assemblies.
7. Remove the paper support shaft by pulling out it toward the right or left side.
Left CSF Roller Cover
Figure 3-52 Removing the CSF Roller Cover
8. Remove the paper holder, and then remove the paper holder spring.
Be careful to assemble the paper feed roller into the proper side of the paper support assembly.
The right and left rollers are not interchangeable.
3-32
8) screws securing the paper support shaft to both right and left CSF frames.
E- ring
LQ-2170 Service Manual
CTPB Screw (3x8)
Right CSF Frame
Right CSF Roller Cover
Rev.A