Operating Instructions; Control Panel Operation; Table 1-41. Operations In Normal Mode; Figure 1-9 Control Panel - Epson LQ-2170 Service Manual

LQ-2170 Service Manual

1.4 Operating Instructions

This section provides detailed information about the LQ-2170 control panel buttons and LEDs.
1.4.1 Control Panel Operations
The printer control panel contains 6 non-lock type push buttons and 10 LEDs for various printer functions.
The exterior view of the control panel is shown in the following figure.
Font
Font
Draft
Roman
Sans Serif
Operation in normal mode
In normal mode, pressing panel buttons executes following functions:
Buttons and
Switches
Rev.A
Pitch Tear Off / Bin
Pitch
Tear Off / Bin
10 cpi
Tear Off
12 cpi
Bin 1
15 cpi
Bin 2
17 cpi
Card
20 cpi
PS

Figure 1-9 Control Panel

Table 1-41 Operation in Normal Mode
Turns the printer on and off.
Alternates printing and non-printing states.
Enables the micro adjust function, when held down for 3 seconds.
Loads or ejects paper
Micro feeds forward, when that function is enabled.
Line feed, when pressed briefly.
Form feeds, when held down for a few seconds.
Micro feeds backward, when that function is enabled.
Advances continuous paper to the tear-off position.
Selects CSF bin 1 / 2 or card mode.
Selects font.
Selects pitch.
Pause
Micro Adjust
3 sec
LF/ FF Load / Eject
LED Off
LED On
LED Blinks
Function
Product Description
Paper Out
Operate
1-29