Epson LQ-1070 Service Manual page 25

(7) FONT Button
Pressing this button selects a font, and pressing it continuously selects the next one, sequentially. The
FONT LED indicates the currently selected font.
(8) CONDENSED Button
Pressing this button toggles the printing mode between normal and condensed, alternatively.
NOTE: Selections of the FONT and CONDENSED buttons
and the CONDENSED selection become effective
I N D I C A T O R S
(1) OPERATE (green)
Lit when the printer's OPERATE button is on, and AC power is supplied.
(2) PAUSE (orange)
when the printer is in PAUSE-mode (no printing, no paper feeding, and not accepting data).
Lit
(3) TEAR-OFF (orange)
Lit when the sheet is advanced to the tear-off position.
(4) DATA (orange)
when the printer has received data from the host. .
Lit
(5) PAPER-OUT (red)
Lit when the paper-out detector senses no paper. Refer to Section 1.6.3, Paper-out Detection and Forms
Override Function.
(6) MULTI-PART (green)
Lit when the adjust lever is
(7) BIN 1 (green)
Lit when bin 1 is selected.
(8) BIN 2 (green)
Lit when bin 2 is selected.
(9) FONT (green) - Draft, Courier, Roman, Saris Serif, Prestige, Script, Script C, Orator, Orator-S, OCR-B
These indicators show the currently selected font.
(10) CONDENSED (green)
Lit when condensed mode is selected.
positioned at the 4th step or higher,
are stored as defaults, so that the last FONT
when the printer is initialized.
1-17