Table of Contents
Advertisement
Chapter 1 : F
eatures and
Detailed Hardware Functions
Power button
Main Control
Buttons
Status Indicator
SD card slot
RESET button
Earphone jack
USB Connector
AC adapter jack
External
antenna
connector
Speaker
Stylus
6
s
peciFication
Press the power button to turn on the GV-201, press it again to close any
open windows and turn it off (enter a standby mode).
NOTE: The GV-201 device needs about 2 seconds to enter the standby
mode or come back to normal operating state. Thus, the power
button may not function well if you continue to press it again within
2 seconds.
System Menu
Mute
Zoom Out (Car Navigation Only)
Zoom In (Car Navigation Only)
Volume Down
Volume Up
charging: yellow blinking.
charging completed: yellow.
battery low: red.
The PC applications and map data can be stored in the SD card.
Use the stylus tip to press down the reset button through the hole to reset
the system.
Plug the earphone or headset to the socket, you can listen to the navigation
voice guide and enjoy your favorite MP3 music.
Connect the GV-201 to PC via a USB cable for data transfer.
Connect the external power connector by using car charger or AC Adaptor.
For you to connect an optional MMCX-type external antenna.
Allow the MP3 and Voice Navigation to played through the built-in speaker
in the back side of the device.
You can use the stylus pen instead of your finger to tap or input on the
screen.
Advertisement
Table of Contents
