Fusion MS-IP700 Instruction Manual page 61

My iPod/iPhone will not
connect to the Head
unit while in the dock.
Problem Solution
Wireless Remote App for iPad and iPhone
My FUSION-
Link Wireless
application
displays "No
stereo available"
My FUSION-Link
Wireless remote
aplication wil
not connect to
my 700 Series
stereo
If your Head unit displays "Not Connected" while using iPod as
input source:
• Check that you are using the correct sleeve combination. If
you have the incorrect sleeve combination this could prevent
the iPod connector from mating correctly. It could also dam-
age the connector in the dock or your iPod/iPhone itself.
If you are uncertain which iPod model you have, go to
http://www.apple.com/support/ to get the correct model
information for your iPod and sleeve.
If you are still unable to connect once you know for certain
you have the correct iPod/iPhone–sleeve combination:
• Ensure that you have the latest version of operating soft-
ware installed in your iPod/iPhone and the latest iTunes
version. To do this, connect your iPod/iPhone to iTunes and
it will check and, if necessary, prompt you to download the
latest version.
If you are still unable to connect once you have confirmed
that you have the latest software or you have updated your
iPod/iPhone:
• Reset the iPod/iPhone (see the user manual for your Apple
product) and also reset the Head unit (see FUSION user
manual).
If you are still unable to connect:
• Contact your FUSION dealer or contact FUSION via the
tech email on the FUSION website.
The first thing to check is that you are connected to the correct
wireless network for the 700 series.Once you have confirmed this
close the App on the device and restart it (consult the manufacturers
website for instructions on restarting) . If this fails check that you have
a valid IP address on the 700 series and follow the instructions in the
below tech support item
The first thing to check is that the 700 series is displaying a valid IP
address on the about screen. Select the settings menu then about to
confirm. If the display is " IPNone " the router is either not a compatible
DHCP product or not configured correctly. If the IP address starts
with the prefix 169. it is not valid, this is a default address when the
router is not sending a DHCP generated IP address or is configured
incorrectly. Please review the Router's instruction manual or contact
the manufacturers website for technical help.
60