Appendices; Troubleshooting - Fusion MS-IP700 Instruction Manual

APPENDICES

TROUBLESHOOTInG

Problem Solution
General
The unit does
• Reset the unit by pressing the Reset button inside the control panel door.
not respond to
key presses.
What is the best As with all products with a chrome finish exposed to the harsh marine
way to prevent environment, a little care will help to preserve the finish and prevent cor-
corrosion on
rosion. FUSION recommends that you clean any salt water and/or salt
my 700 Series residue from the front panel with a damp cloth soaked in fresh water.
chrome finish?
Problem Solution
SiriusXM
When I press Ensure you have the MS700 Tuner region set to 'USA'. Press Menu >
the tuner source
Settings > Tuner region > and select 'USA'.
button the • Ensure the SiriusXM module is plugged into the MS700.
SiriusXM screen • Unplug the SiriusXM module and check the pins in the SiriusXM
is not displayed.
SiriusXM
• Ensure the SiriusXM module is plugged into the MS700.
message: 'Check
• Ensure the SiriusXM cable has not been damaged.
Tuner'
SiriusXM • Ensure the antenna is plugged into the SiriusXM Tuner module.
message: 'Check • Ensure the antenna is not damaged.
Antenna'
• Ensure the antenna cable has not been damaged
SiriusXM
• Ensure the antenna is not damaged.
message: 'No • Ensure the antenna has a clear view of the sky and is not obscured.
Signal'. • Ensure the antenna cable has not been damaged
plug are not damaged.
58