Ethernet Support; Wired Remote - Fusion MS-IP700 Instruction Manual

ETHERnET SUPPORT

Connect an All-In-One-DHCP Wireless Ethernet Router to the 700 Series
entertainment system and Apple® devices like the iPad, iPhone and iPod
touch® can wirelessly control the audio around the boat. Apps are available
for purchase to enable iPad, iPhone or iPod touch wireless control. from the
iTunes app store. Android apps are available for purchase from Google Play.
For further connection details, see www.fusionelectronics.com

WIRED REMOTE

The 700 Series Marine Stereo can be controlled by MS-NRX200 wired
remote controls installed in the various audio Zones throughout the vessel.
There are different cable requirements depending on whether the 700 Series
and remote controls are connected to an existing NMEA2000 bus or in a
FUSION-only installation.
NMEA-2000 bus installation
FUSION's MS-NRX200 wired remote controls can connect to the
NMEA 2000 bus, removing the need to wire back to the stereo unit. The
communication is both ways, as FUSION's MS-NRX200 remote can repeat
NMEA data like depth, speed and wind direction on the remote's screen.
You will require a FUSION NMEA 2000 starter kit (MS-N2KSTART — to
create a NMEA Bus) if you wish to connect the remote to the the existing
NMEA 2000 Bus, you will require a MS-N2KCONN.
FUSION-only installation
Smaller or older vessels without NMEA 2000 can still have FUSION
MS-NRX200 wired remotes in almost any location.
No starter kit is required as the MS-NRX200 wired remote package includes
everything necessary to connect it directly to the 700 Series unit.
30