Fusion MS-IP700 Instruction Manual page 54

3. Enter the old (current) access code by turning the Encoder to change the
highlighted digit, then press the Encoder to select the next digit. When you
have entered all four digits correctly, you will be prompted to enter the
new access code.
4. Enter the new access code by turning the Encoder to change the
highlighted digit, then press the Encoder to select the next digit. When you
have entered all four digits correctly, you will be prompted to enter the
new access code for a second time.
5. Press the Menu key (or leave to time out) to save the new code and exit.
Channel Locking / unlocking
Any channels (not just mature content channels) can be locked. Locked
channels cannot be seen in the Sirius Source Screen or when changing
channels with the Forward and Backward keys. Locked channels can be
accessed in parental mode only.
To access a locked channel:
1. Press the Menu key.
2. Do one of the following:
a. Turn and then press the Encoder to select Parental > Unlock.
OR
a. Turn and then press the Encoder to select Parental > Channels.
b. Tune to the channel you require. This channel will display a
padlock icon, to the right of the screen.
3. Enter your access code.
4. Press the Menu key to return to the Sirius Source Screen.
To lock or unlock a channel:
1. Press the Menu key.
53