Fusion MS-IP700 Instruction Manual page 46

2. Insert your USB flash drive onto the USB socket or insert your iPod in its
sleeve (see iPod compatibility sheet supplied separately) ). Make sure that
the device is firmly pushed onto the connector socket.
3. Close the control panel door firmly.
4. Select input from the device, as required.
MS-AV700 model
To connect your iPod, you will need:
• Portable media device dock (MS-DKIPUSB), or
• Apple Sync Cable.
To connect your USB flash drive, you will need:
• Portable media device dock (MS-DKIPUSB), or
• USB cable (the USB cable on the MS-AV700 unit must be accessible).
Note: If you select iPod or USB input without first connecting the
device, the message "Not connected" is displayed on the screen.
45