Fusion MS-IP700 Instruction Manual page 47

To connect your iPod or USB flash drive to the 700 Series via a
MS-DKIPUSB dock:
1. Press the door catch and open the door of the dock.
2. Insert your USB flash drive into the USB connector or insert your iPod
in its correct sleeve. Make sure that the device is firmly pushed onto the
connector socket.
3. Close the door firmly.
4. Select input from the device, as required.
To connect your iPod to the 700 Series via an Apple Sync cable
(AV700 only):
1. Plug the USB plug of your Sync Cable into the USB socket of the external
USB cable on the MS-AV700.
2. Connect your iPod or iPhone to the 30-pin Connector of your Apple Sync Cable.
3. Select input from the device, as required.
Portable media device dock
(MS-DKIPUSB)
46