Preparing For Ipod Or Usb Input - Fusion MS-IP700 Instruction Manual

To enter the name for the selected Zone:
a. Select the Name menu item. The current Zone name is displayed with
the first character highlighted.
b. If required, press the Forward (or Backward) key to highlight the
character you wish to change.
c. Turn the Encoder to display the required value for the highlighted
character.
d. Press the Encoder to accept the displayed value and move to the next
character.
e. Repeat Steps b–d until you have worked through all the characters you
wish to change.
f. Press and hold down the Encoder to save the changes and exit.

PREPARInG FOR iPod OR USB InPUT

This section describes how to prepare for iPod and USB input for the
MS-IP700 and MS-AV700 models.
When using your iPod with either model:
• Always disconnect your iPod from the unit when not in use and do not
leave in your vessel. This helps reduce risk of theft or damage as vessel
cabins can reach extreme temperatures.
• Do not remove iPod or use stereo in a distracting manner while operating
the vessel. Check and obey all marine laws in association with use.
43