Usb Source Screen; Controlling Usb Flash Drive Playback - Fusion MS-IP700 Instruction Manual

USB SOURCE SCREEn

An example of a typical USB flash drive input source screen is shown in
Figure 5 below.
Figure 5 – Example USB flash drive source screen
Current time
Current track
details
Current track
number out of total
number in folder
Elapsed time

COnTROLLInG USB FLASH DRIVE PLAYBACK

Selecting audio tracks from USB flash drive
You can store audio tracks (MP3 format only) on a USB flash drive for
playback on the 700 Series. Audio tracks can be stored in folders on the
flash drive and selected for playback, as required. The flash drive must be
formatted to FAT32 or NTFS format (these are the most commonly used
flash drive format).
For example, to select a Folder then track.:
Press If your flash drive
Menu key has not been
named, the default
name is disk.
25
Press Encoder to
select KINGSTON.
Files and folders on
the flash drive are
displayed.
Play status indicator
Playback mode
indicator:
Shuffle
(if active)
Progress bar
Track Duration
Turn Rotary
Encoder to scroll
the highlight.
Press Encoder to:
• select Folder
then track for
playback.
Repeat
Menu
exit. See
"Menu Key
Operation"
on page 6.