Connections - Fusion MS-IP700 Instruction Manual

CONNECTIONS

DESCRIPTIOn
Battery +12VDC
Accessory +12V switched
Negative Ground
Remote Amplifier Enable ouput
Dim input [12VDC active]
Telemute input [GND active]
Note: All +12V wiring MUST be fused at the power source end of your cable, with
a 15 A fuse. When the red "Accessory +12V switched" wire is not required in your
installation, it MUST be connected together with the Yellow "Battery +12V" wire at the
MS-700 head unit wiring loom.
When connecting the Dim input ensure the wire gauge used is suitable for the fuse
supplying the circuit being connected to.
AnTEnnA COnnECTIOn
Connect an AM/FM marine antenna.
Note: Do Not Connect to a VHF splitter
AUX INPUT
Connect an Auxiliary source to the left and right RCA (White = L, Red = R).
VIDEO COnnECTIOn
(MS-IP700 iPod/iPhone video only, MS-AV700 DVD video only)
Connect the composite video output (Yellow = Video) to a TV / LCD monitor
USB COnnECTIOn (MS-AV700 only)
Connect an Apple sync cable (not included), or USB Flash Drive (not included) or
connect the MS-DKIPUSB Portable Media Device Dock (not included)
Note: MS-IP700 has internal USB socket
nMEA2000 / WIRED REMOTE
For connection to a MS-NRX200 Remote (not included).
For connection to an existing NMEA2000 Bus a MS-N2KCONN is required (not
included)
To install a new NMEA2000 Bus a MS-N2KSTART is required (not included)
35
COLOUR
Yellow
Red
Black
Blue/White
Orange
Brown