Installing The Main Unit - Eclipse AVN5435 Installation Manual

Installing the main unit

Installing the main unit
- Installation angle -
Tip
To maintain proper function, the unit must be
mounted less than 30 degrees. If the angle is in
excess of 30 degrees, DVD/CD skipping or
ejection may occur.
- Mounting the main unit (example)-
Tip
Connect all cables before installing the main
unit.
1
Remove the pocket and any other accessories
from the center cluster to make room for the main
unit.
2
Remove the mounting brackets for the pocket.
3
Attach the brackets to the main unit.
4
Install the main unit in the vehicle.
Tip
Be sure to use the accessory screws (M5x8) to
install.
Center cluster panel
Pocket, etc
Hex-head bolt
6
(Red:M5 x 8) x 8
Hex-head bolt
6
(Red:M5 x 8) x 8
Select the screws in accordance with the shapes
of the screw holes in the mounting bracket.
- 17 -
Front
30˚ or less
Mounting bolts
Main unit
1
Mounting bracket
Flathead
7
screw
(Red:M5x8) x 8
Level (reference)