Eclipse AVN5435 Installation Manual page 7

Wire colors and connection points for connection cables
Never connect the power supply to the speaker leads (No.6 and No.7),
otherwise it will cause damage to the main unit.
Caution
B+ (Yellow)
1
Connect where power is constantly available, regardless of the ignition key's position.
ACC (Red)
2
Connect where the power comes on when the ignition is in the ACC position.
Illumination power supply (Orange/White)
3
Connect to where power comes on when the vehicle light switch is turned on.
Antenna power supply (Blue)
4
Connect to the automatic-antenna control terminal of the vehicle.
Control power supply (Blue/White)
5
Connect the control terminal for the external amplifier, etc.
Front speaker output leads
6
Connect to the front speakers.
Rear speaker output leads
7
Connect to the rear speakers.
Ground (Black)
8
Connect where good body grounding is available.
F
Genuine steering remote control terminal
Connect to the vehicle steering remote control.
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.
G
VCR external input terminal (6P)
Connect to the output cable of external video equipment such as a VCR.
White: Left +
Gray: Right +
Green: Left +
Purple: Right +
Ask your dealer for details.
- 7 -
and
2
White/black: Left -
Gray/Black: Right -
Green/black: Left -
Purple/Black: Right -
and
3 4